Need help? Call our friendly Trade Counter team on 01278 228670 or email [email protected]

Need help? Call 01278 228670

Corrugated Metal Sheets

Corrugated metal roofing sheets – cut to length

Our corrugated metal roofing sheets are manufactured to order and cut to your exact required length, helping reduce waste and improve installation efficiency on site.

The popular 13/3 corrugated profile is suitable for a wide range of agricultural, industrial and commercial buildings. Sheets are available in multiple colours, finishes and thicknesses, with reliable lead times and delivery direct to site.

Read more Read less

Corrugated metal roofing sheets – cut to length

Our corrugated metal roofing sheets are manufactured to order and cut to your exact required length, helping reduce waste and improve installation efficiency on site.

The popular 13/3 corrugated profile is suitable for a wide range of agricultural, industrial and commercial buildings. Sheets are available in multiple colours, finishes and thicknesses, with reliable lead times and delivery direct to site.

Not sure what you need?

Calculate my roof cost

  • Delivery £120, or £75 when you spend £500 or more (most of England and Wales)

  • Cut to length

    13/3 Corrugated Polyester Paint Coated Roof Sheet

    From£7.94 excl. VAT £9.53 incl. VAT

    per metre

    Delivery to England, Wales and mainland Scotland: 6-10 working days to most postcodes
  • Cut to length

    13/3 Corrugated PVC Plastisol Coated Roof Sheet

    From£12.08 excl. VAT £14.50 incl. VAT

    per metre

    +3
    Delivery to England, Wales and mainland Scotland: 6-10 working days to most postcodes
  • 13/3 Corrugated 0.5mm Plain Galvanised Metal Sheets

    From£32.80 excl. VAT £39.36 incl. VAT
    Delivery to England, Wales and mainland Scotland: 6-10 working days to most postcodes

Not sure what you need?

Our roofing calculator takes care of it.

Enter your measurements, pick your sheet and colour, and the calculator prices the sheets, flashings and fixings for your whole roof — ready to add to your basket in one tap.

Calculate my roof cost

Frequently asked questions

What is 13/3 corrugated sheet?

13/3 is a corrugated sheet with 13 corrugations across its width, 76 mm apart and 18 mm high. Its cover width is 988 mm. It is sold in PVC Plastisol, Polyester and plain galvanised.

Can I use 13/3 on roofs and walls, and what is the minimum roof pitch?

Yes. One sheet is used for both, so there is no reverse side to choose. On a roof the minimum pitch is 5 degrees.

How much should the sheets overlap?

Side lap one and a half corrugations. End lap 200 mm minimum, on a purlin (a rail on a wall), with the upper sheet over the lower. Tape every side lap and end lap, and stitch side laps through the first crown of the lap with 22 mm screws, 400 mm apart at most.

How do I fix the sheets?

On a roof, fix through the crown, three per sheet width, at every purlin. Put nothing under the crown, drive until the washer seats and stop before the crown dents. Never fix in a valley on a roof. On a wall, fix through the valley, three per sheet width, at every rail, with a fourth on the free-edge sheet at the end of a wall. Purlin or rail centres and screw length: as set by your building's design; ask us if unsure.

How do I stay safe when laying sheets?

Two people to a sheet, always. Sheets are sharp along every edge, so wear clean gloves with a grip. Stop sheeting in high or gusting wind. Never walk on an unfixed sheet or on the side lap of a fixed one. Use load-spreading boards on the roof.

What colours and thicknesses can I buy?

Leathergrain PVC Plastisol, about 200 micron on galvanised steel, in ten colours: Anthracite, Black, Goosewing Grey, Juniper Green, Merlin Grey, Moorland Green, Olive Green, Slate Blue, Van Dyke Brown and White. Polyester in six: Anthracite, Black, Goosewing Grey, Juniper Green, Slate Blue and White. Plain galvanised is also sold. Coated sheets come in 0.5 mm or 0.7 mm; the product page shows which colours come in which. Anti-condensation felt is available on 0.7 mm PVC Plastisol and Polyester sheets only.

What lengths are there?

Coated sheets are cut to the length you need, from 1 m to 7.1 m. Plain galvanised comes in fixed lengths of 3050 mm and 3660 mm.

Where are corrugated sheets made, and how do they arrive?

Briarwood makes them at Highbridge, Somerset. Delivered by lorry to the kerbside in 6 to 10 working days, to England, Wales and mainland Scotland.

Do you need a custom length?

As a proud British manufacturer, we can make custom cut length metal profiled roofing sheets available in a huge array of colours. We have an extensive portfolio of profiles which we currently manufacture and can supply you for your projects.

Reach out to our Trade Counter team today by calling 01278 228670 or by emailing [email protected] for your custom quotation.

Contact us today

We can handle your bespoke requirements