Flat 0.7 1220x3000mm PVC Plastisol Metal Sheet in AnthraciteBriarwood Products
Read our reviews on Trustpilot
- Handling & Storage
Flat 0.7 PVC Plastisol Metal Sheet in Anthracite
Our Metal Flat Sheets are available in 3000mm lengths by 1240mm wide. They are 0.7mm thick and have a PVC Plastisol coating.
|PVC Plastisol coated
Maintenance of Metal Profiled Sheets
It is good practice to carry out annual inspection of the building exterior and to carry out any remedial work identified during the inspection. Minor scuffing of the colour coating should not be treated. Deeper scratches which reach the substrate should be repaired with touch-up paint.
The touch-up paint should only be applied to the original scratch using a fine paint brush. As touch-up paint will dry to a slightly different colour to the original coating, so the area which is touched up should be kept as small as possible.
Handling and storage
Profiles are supplied banded when delivered to site. Offloading is the responsibility of the customer. Profiles can be off-loaded directly to the roof, or to a storage area, which should be dry and well away from traffic. Packs may be stacked using suitable wooden bearers and packers. Bearers should be placed above each other.
Handle profiles carefully to avoid marking weather sheets. Lift sheets from the pack – do not drag them. Observe site health and safety procedures and the results of manual handling and other assessments.